Go Back

Tree Pruner of Discs

A cutting arm of 3, 4, 5 or 6 saw disks of Ø600 A lifting and positioning system. Horizontal and vertical displacement cylinders. A pruning height marker.
TRIGINER Brand: TRIGINER

 

The cutting system consists of:

  • A cutting arm of 3, 4, 5 or 6 Ø600 saw blades (if requested, last or the last two disks can be removed from the arm, or added when desired).
  • A lifting and positioning system.
  • Horizontal and vertical displacement cylinders.
  • A pruning height marker.
Different cutting widths
3 discs Ø600 1.6 m cutting
4 discs Ø600 2,1 m cutting
5 discs Ø600 2,6 m cutting
6 discs Ø600 3,1 m cutting

Tree Pruners machines are mounted in:

  • Loader arms
  • Pallet truck
  • Brushcutter
  • Telehandler
  • Angular Lift Mast

- Provided that in the pump of these tractors or machines a minimum of 70 liters is obtained and a pressure of 150 kg / cm² -


The hydraulic equipment is high-end and high performance. The motor is made of steel and can rotate in both directions. The discs can rotate in the two directions of rotation, having a double plate tie fastened by a central register and four screws, just by changing the position of the two quick plugs of pressure and return.

It gives a protector for the discs that is placed when circulating by road.
Pre-scraping machines can be attached to any tractor, small or large, provided that they are properly balanced, behind and opposite the discs, according to models, for perfect balance and maximum safety.The cabin of the tractor is equipped with shielded glass and screen, for the maximum protection and visibility of the tractor driver.